TinyMight 2 Portable Vaporizer

• 1 x Tinymight 2 dry herb vaporizer (Walnut)
• 1 x 80 mm titanium tube
• 1 x 55 mm quartz glass tube
• 1 x Cooling unit (in the glass tube)
• 1 x Molicel P26A or P28A
• 1 x 1 x O-Rings & screens set
• 1 x USB-C Charging Cable
• 1 x Carrying Pouch
• 1 x Instructions manual (English)

On-demand mode is ideal if you like quick, powerful draws without waiting for the device to fully heat up. You simply press the button when you want vapour and release it when you’re done.

1. Hold the device upside down and remove the mouthpiece. Add your material to the opposite end of the mouthpiece, then place it back into the device while it is still upside down. This helps keep everything in place and avoids spills. We recommend using a dosing capsule for your dry herb.
2. Choose your temperature using the dial on the bottom of the unit. Lower settings (around 3 to 5) are great for lighter, flavour-focused vapour. Higher settings (around 7 to 9) produce thicker vapour and stronger effects. There is no right or wrong setting, so experiment and find what feels comfortable for you.
3. To turn the device on, press the button three times quickly and wait a few seconds.
4. To start heating, press and hold the button. You will feel a vibration when the Tinymight 2 reaches temperature and is ready to use.
5. Keep the button held down while you inhale from the mouthpiece. Slow, steady draws usually give smoother vapour and better flavour.
6. When you are happy with your draw, release the button but keep inhaling for a moment. This clears any remaining vapour from the air path.
7. You can repeat this process until your material turns light brown and stops producing vapour.
8. When you are finished, press the button three times quickly to turn the device off.

If you’re new to vaporizing, it can help to start at a lower temperature and increase it gradually as you get used to the device.

All technical specification information sourced from manufacturer.

TinyMight 2 Manual